¶ Densu Models Back Panel Features and Indicators
Both mDECK Densu io and mDECK Densu tl models are at the End of Life.
Check out the back panel features and indicators applied to mDECK Densu io and mDECK Densu tl models.
| Item | URL | Connector | Description |
|---|---|---|---|
| 1 | - | USB 3.0 port | Use the USB 3.0 port to connect USB devices to the system |
| 2 | - | Gigabit Ethernet port | Use the gigabit ethernet port to connect Local Area Networks (LANs) to the system at a rate of up to 1 Gbit/s |
| 3 | - | 2.5 Gigabit Ethernet port | Use the 2.5 gigabit ethernet port to connect Local Area Networks (LANs) to the system at a rate of up to 2.5 Gbit/s |
| 4 | - | HDMI | Enables you to connect a display device to the system |
| 5 | - | DisplayPort | Enables you to connect a display device to the system |
| 6 | - | Audio Out | Enables you to connect an audio out device from the system |
| 7 | - | Power Supply | Supports 300W |
| 8 | - | I/O Breakout Connector | The provided breakout cable can be used to expand the available I/Os. (check the Breakout Cable section for more info) |
| 9 | - | Live IP Port (Optional) | Enables you to connect an Live IP video input or output |
| 10 | 0 | HD-BNC channel 1 – 3G-SDI In / Out | Enables you to connect an SDI video input or output |
| 11 | 1 | HD-BNC channel 2 – 3G-SDI In / Out | Enables you to connect an SDI video input or output |
| 12 | 2* | HD-BNC channel 3 – 3G-SDI Out / SD-SDI In - Channel 1 Loopback | Enables you to connect an SDI video input or output |
| 13 | 3* | HD-BNC channel 4 – 3G-SDI Out / SD-SDI In - Channel 2 Loopback | Enables you to connect an SDI video input or output |
| 14 | - | Ref. In (Tri-Level / Blackburst) | Enables you to connect a reference input |
| 15 | - | LTC | Enables you to connect an LTC input |
* When configuring each node with 1 channel as an input and another as output, this URL cannot be used in the services configuration, as it will work as a loopback.
Note: use the value of the “URL” column to configure the control panel services (rPlayerSDI page and sCapture page).
Maximum cable length distances for each SDI channel and input / output:
Recommended cables: Belden 1694A.
Check out the back panel features and indicators applied to mDECK Densu io and mDECK Densu tl models.
| Item | URL | Connector | Description |
|---|---|---|---|
| 1 | - | USB 3.0 port | Use the USB 3.0 port to connect USB devices to the system |
| 2 | - | DisplayPort | Enables you to connect a display device to the system |
| 3 | - | HDMI | Enables you to connect a display device to the system |
| 4 | - | Gigabit Ethernet port | Use the gigabit ethernet port to connect Local Area Networks (LANs) to the system at a rate of 1 Gbit/s |
| 5 | - | Audio Out | Enables you to connect an audio out device from the system |
| 6 | - | Power Supply | Supports 300W |
| 7 | - | Live IP Port (Optional) | Enables you to connect an Live IP video input or output |
| 8 | - | I/O Breakout Connector | The provided breakout cable can be used to expand the available I/Os. (check the Breakout Cable section for more info) |
| 9 | 0 | HD-BNC channel 1 – 3G-SDI In / Out | Enables you to connect an SDI video input or output |
| 10 | 1 | HD-BNC channel 2 – 3G-SDI In / Out | Enables you to connect an SDI video input or output |
| 11 | 2* | HD-BNC channel 3 – 3G-SDI Out / SD-SDI In - Channel 1 Loopback | Enables you to connect an SDI video input or output |
| 12 | 3* | HD-BNC channel 4 – 3G-SDI Out / SD-SDI In - Channel 2 Loopback | Enables you to connect an SDI video input or output |
| 13 | - | Ref. In (Tri-Level / Blackburst) | Enables you to connect a reference input |
| 14 | - | LTC | Enables you to connect an LTC input |
* When configuring each node with 1 channel as an input and another as output, this URL cannot be used in the services configuration, as it will work as a loopback.
Note: use the value of the “URL” column to configure the control panel services (rPlayerSDI page and sCapture page).
Maximum cable length distances for each SDI channel and input / output:
Recommended cables: Belden 1694A.
¶ Breakout Cable
In Densu models, a breakout cable is provided and can be used to expand the available I/Os.
To expand the available I/Os, connect the cable to the I/O Breakout Connector, whose location is mentioned above, in the back panel image and table.
The cable provides the following I/Os:
- 4x RS422 branches;
- 1x GPIO Out branch with 4 outputs;
- 1x GPIO In branch with 4 inputs.
Note: for information on GPIO Connections from Densu Servers, please check the GPI and GPO pages.