Solid Model Front Panel Features and Indicators

Item	Description
1. Status indicators		Indicates the drive status
	Indicates the temperature status
	Indicates the electrical status
	Indicates the memory status
	Indicates the PCIe status
	System health and system ID indicator Solid blue: indicates that the system is turned on, system is healthy, and system ID mode is not active. Press the system health and system ID button to switch to system ID mode Blinking blue: indicates that the system ID mode is active. Press the system health and system ID button to switch to system health mode Solid amber: indicates that the system is in fail-safe mode Blinking amber: indicates that the system is experiencing a fault. Check the System Event Log or the LCD panel, if available on the bezel, for specific error messages
2. System status		Indicates if the system is powered on or off. Press the power button to manually power on or off the system. Press the power button to gracefully shut down the ACPI-compliant operating system.
	The USB port is a 4-pin connector and 2.0-compliant. This port enables you to connect USB devices to the system.
	The iDRAC Direct port (Micro-AB USB) enables you to access the iDRAC Direct Micro-AB features. You can configure iDRAC Direct by using a USB to micro USB (type AB) cable, which you can connect to your laptop or tablet.
3. Information tag	The Information tag is a slide-out label panel that contains system information such as Service Tag, iDRAC MAC address and LOM 1 MAC address.

¶ Solid Model Front Panel Features and Indicators